5/13/2009 11:43:48 AM 41050

Features and Benefits
  • All-polypropylene construction
  • Resin-free, melt-sealed
  • Constant density tapered pores
  • High-capacity for long-life
  • Fixed pore, non-shedding
  • Low protein binding
  • Low extractables
  • Broad chemical compatibilities
  • Autoclavable and steamable in situ
  • Manufactured for use in conformance with cGMP
  • ISO 9000 Certified Quality System
  • Pharmaceutical P optimized grades with Certificate of Test provided
  • FDA-listed materials per 21 CFR
Note: These filters are also available in Kleenpak Nova capsule format.

Quality and Bio-Safety

Biological Tests

  • Meets USP Biological Reactivity Test, in vivo, for Class VI-121 °C Plastics

Effluent Quality Tests*

  • Meets Cleanliness per USP Particulates in Injectables
  • Non-Fiber-Releasing Non-Pyrogenic per USP
  • Bacterial Endotoxins (< 0.25 EU/mL)
  • Meets Total Organic Carbon and Water Conductivity per USP Purified Water, pH per USP Sterile Purified Water
* Per lot sample soak or rinse-up flush aliquots.]]> Materials of ConstructionMedium     Polypropylene
Support and Drainage Layers     Polypropylene
Core, Cage and End Caps     Polypropylene
P Grade Code 7 Adapters     Polypropylene with encapsulated stainless steel ring
O-ring    Silicone1
1 Other polymers available

Removal Ratings (Liquid)2

70 µm, 40 µm, 20 µm, 10 µm, 6 µm, 4.5 µm, 2.5 µm, 1.2 µm, 0.6 µm3
2  > 99.98% by modified OSU-F2 test. 0.6 to 20 µm in water, 40 and 70 µm in oil.
3 Extrapolated value.


Nominal Dimensions

Lengths     10 in. (254 mm), 20 in. (508 mm), 30 in. (762 mm), 40 in. (1016 mm)
Diameter    70 mm (2.75 in.)

Operating Conditions

Maximum Differential Pressure and Temperature4

5.5 bard (80 psid) to 50 °C (122 °F) 4.1 bard (60 psid) to 80 °C (176 °F)
4 Using compatible fluids.

Autoclaving and Steaming in situ5

Maximum Steam Temperature 140 °C (284 °F)
5 Filters should be qualified in actual use. Contact Pall for recommended procedures.

 

Typical Liquid Flow Rates6

6  Typical initial media ∆P 10 in. (254 mm) element; water at 20 °C (68 °F); viscosity 1 cP. For assistance in filter assembly sizing and housing selection, contact your local Pall representative.
]]> HDC® II Filter Cartridges


 Click for Part Number Configuration details

This is a list of typical part numbers for the products described in this catalogue.
For part numbers and configurations that are that are not listed, please contact your Pall representative.

AB05J0457PH4 AB1J0063PH4 AB1J0067PH AB1J0067PH4
AB1J0123PH4 AB1J0127PH1 AB1J0127PH13 AB1J0127PH4
AB1J0127PJ AB1J0257PH4 AB1J0257PJ AB1J0258PH4
AB1J0457PH AB1J0457PH1 AB1J0457PH13 AB1J0457PH4
AB1J0607PH1 AB1J0607PH13 AB1J0607PH4 AB1J0607PJ
AB1J0608PH4 AB1J1007PH1 AB1J1007PH4 AB1J2007PH4
AB1J4007PH4 AB1J4007PJ AB1J7007PH4 AB2J0067PH4
AB2J0127PH4 AB2J0127PJ AB2J02528PH4 AB2J0257PH4
AB2J0257PJ AB2J0457PH4 AB2J0607PH4 AB2J1007PH4
AB2J1007PJ AB2J2007PH4 AB2J2007PJ AB2J4007PH4
AB3J0067PH4 AB3J0127PH4 AB3J0257PH4 AB3J0457PH4
AB3J0607PH4 AB3J1007PH4 AB3J2007PH4 AB3J4007PH4
FLF6001J012P FLF6001J060P

AB05 J0 J0457 AB1 J0063 J0067 J0123 J0127 J0257 J0258 J0457 J0607 J0608 J1007 J2007 J4007 J7007 AB2 AB3 FLF6001 J012 FLF J060   PH4  PH13  PJ   PH1  6001

 
AB05J0457 AB1J0063 AB1J0067 AB1J0067
AB1J0123 AB1J0127 AB1J0127 AB1J0127
AB1J0127 AB1J0257 AB1J0257 AB1J0258
AB1J0457 AB1J0457 AB1J0457 AB1J0457
AB1J0607 AB1J0607 AB1J0607 AB1J0607
AB1J0608 AB1J1007 AB1J1007 AB1J2007
AB1J4007 AB1J4007 AB1J7007 AB2J0067
AB2J0127 AB2J0127 AB2J02528 AB2J0257
AB2J0257 AB2J0457 AB2J0607 AB2J1007
AB2J1007 AB2J2007 AB2J2007 AB2J4007
AB3J0067 AB3J0127 AB3J0257 AB3J0457
AB3J0607 AB3J1007 AB3J2007 AB3J4007
FLF6001 FLF6001

]]> /images/HDCII-Filters(1).gif